Supreme

Supreme

Posted on 19Jul

The Supreme series includes the 10-15-20kVA three/single-phase

The Supreme series includes the 10-15-20kVA three/single-phase, 10-15-20-30-40 -60-80kVA three-phase models and uses double conversion on-line technology (VFI) with an in-built isolation transformer on the inverter output. The load is powered continuously by the inverter with a filtered, stabilized and regulated sinewave supply. The input and output EMI filter considerably increase the immunity of the load to mains disturbances and surges.

Supreme provides maximum protection for vital ‘mission-critical’ networks, security applications (electromedical) and industrial applications thanks to its outstanding mechanical and electrical design.

Supreme is supplied with UPS Network Monitoring3 software as standard and can be remotely monitored using the Teleguard system from anywhere in the world. Additional battery extension packs allow the standard battery runtime to be extended up to several hours.


Must 900

Posted on 19Jul

MUST 900 is a 3 phase and a single module capacity
30KVA

The MUST 900 series is an uninterruptible power supply, three-phase input/output, with its single module capacity
30KVA (model: 30PM). The modular UPS systems are designed to cover a wide range of power ratings from 30KVA
to 900KVA and is designed to deliver the best combination of reliability, functionality, hot swapping and flexibility at
a competitive price.

The MUST 900 series modular UPS combines the lastest three-level IGBT technology with DSP control arithmetic.
Along with high input power factor, low THDi and high efficiency, this product achieves very high load adaptability.

The modular UPS ensures reliable and trouble-free operation for the critical load. The MUST 900 series can be easily
expanded by adding power modules to the system to reach 300KVA in a single frame. It is possible to connect three
frames in parallel to increase the capacity to a maximum of 900KVA power.


Supreme Plus

Posted on 19Jul

Supreme Plus I (IGBT Rectifier) from 100-200 kVA three-phase models

The Supreme Plus and newly added Supreme Plus I (IGBT Rectifier) range from 100-120-160-200 kVA three-phase models and uses double conversion on-line technology (VFI) with an isolation transformer on the inverter output.

The load is powered continuously by the inverter with a filtered, stabilized and regulated sinewave supply. The input and output EMI filter considerably increase the immunity of the load to mains disturbances and surges.

Supreme Plus & Supreme Plus I provides maximum protection for vital ‘mission-critical’ networks, security applications (electromedical) and industrial applications thanks to its outstanding mechanical and electrical design.


SR10-120

Posted on 19Jul

Ideal for the protection of critical application and information

SR10-120 is ideal for the protection of critical information and telecommunications networks which cannot run the risk of being powered from a poor quality electrical supply.

The SR10-120 series is available in 10-12-15-20 kVA three-phase and single-phase input and single-phase output models, and 10-12-1520-30-40-60-80-100-120 kVA three-phase input and output models, with double conversion on-line technology according to the VFi-SS-111 classification, as defined by the iEC EN 62040-3 standard.

SR10-120 has been designed and manufactured using state-of-the-art technologies in order to deliver maximum protection for critical users, a zero impact on the mains power supply and high operating efficiency.

The high level of flexibility at the design stage means that there is full compatibility both with three-phase power and with single-phase sources, thus eliminating any critical factors in the connection between uPS and system.

Main Features:

  • Reliable, filtered, stabilized and regulated sine wave output (double on-line conversion technology VFi according to EN50091-3 standard) with filters for atmospheric disturbance suppression
  • high reliability: igBT Technology in rectifier and inverter, high-frequency PWm, transformerless, fully digital control with a microprocessor, no-break static and manual transferring
  • Cleaned source: power factor correction for unitary power factor and very low input ThDi%
  • First class in efficiency: high operation efficiency up to 96,5% in normal mode, up to 99% in eco-mode operation
  • Low noise levels: the high-frequency PWm for rectifier and inverter allows very low audible noise
  • Flexibility: SR10-120 can be set for several configuration as normal mode, smart mode and stand by off
  • maximum reliability: SR10-120 can work in parallel up to 6 units. The uPS continues to operate in parallel even if one of the communication cables is disconnected
  • Battery care system: SR10-120 is suitable for use with sealed VRLA, Agm, gEL or open-vented load acid batteries, Ni-Cd batteries
  • Temperature voltage compensation
  • Deep discharging controlled by microprocessor with load and main levels (sharing power mode suitable within -40% Vin)
  • High power availability: the output factor 0,9 providing up to 15% more active power than traditional uPS and more load expansion
  • Low management cost: the transformer less technology allows the lowest footprint in this category. The SR10-120 design allows front, top, and sides access

ST Rack Mount

Posted on 19Jul

Rack-mountable with the standard frame structure

Product Features:

  • Adopts 19-inch standard frame structure design
  • Sine wave output in utility mode or battery mode with low distortion
  • Input null line and firewire detecting function
  • Voltage protection and strong anti-interference function
  • Input power factor correction
  • Zero delay transfer

Must 400

Posted on 18Jul

MUST 400 series is three phase input/output, and modular

The MUST 400 series is an uninteruptible power supply, three phase input/output, with its module capacity ranging from 10KVA, 15KVA & 20KVA (model: 10PM, 15PM, 20PM). It is designed to cover power rating from 10KVA to 400KVA. It is designed for mission critical load in (N+1) redundant hot swappable & scalable application.

The MUST 400 series modular UPS combines the last IGBT three-level technology with DSP control arithmetic. Along with high input power factor, low THDi and high efficiency, this product achieves very high load adaptability.

The modular UPS ensures reliable and trouble free operation for the critical load. The MUST 400 series can be easily expanded by adding power modules to the system to reach 200KVA in a single frame. It is possible to connect two frames in parallel to reach maximum 400KVA power.

EACH MODULE CONSISTS:
• IGBT Rectifier • Battery Charger • IGBT Inverter • Double DSP Control Logic


1.5 to 3 KVA

Posted on 18Jul

UPS, AVR with overload protection.

PCS Power mt series

features:

  • Wide AVR range
  • Overload and short circuit protection
  • Low battery alarm
  • UPS is auto when AC recovery
  • and more…

1 to 10 KVA

Posted on 18Jul

Operates at high efficiency. Suitable for PCs,servers, small networks.

True On-Line, High Frequency and Double Conversion Technology

key features:

  • Double conversion on-line technology
  • Fully digitized microprocessor control
  • Wide input voltage range
  • Advanced power battery management
  • Automatic battery charging in UPS off mode
  • Lightning and surge protection
  • Short circuit and overload protection
  • Operates at high efficiency(>95%). Suitable for PCs,servers, small networks.

30 to 80 KVA

Posted on 16Jul

PCS ST Series offers 30 to 80 KVA power.

Product Features:

  • Digital Signaling Processor System (DSP)
  • Fully Digitized Microprocessor Control
  • Overload and Short Circuit Protection
  • N + X Parallel Connection
  • Cold Start Function
  • Intelligent Slot for SNMP Connection

TDX33 Series

Posted on 16Jul

TDX33 Series IGBT technology-based converter and inverter

Product Features:

  • IGBT based converter and inverter control technology. True Online, double-conversion topology
  • Graphic user interface with full touch screen LCD monitor control
  • Filtered, stabilized and regulated pure sine wave output with filters for atmospheric disturbance suppression
  • Full digital control. Equipped with DSP, MCU, and CPLD
  • Low loss, high efficiency up to 94% in online mode and 97% in eco mode
  • Can parallel up to eight (8) units for redundancy or capacity
  • With various communication ports (RS232,RS485 and AS400)
  • Built-in input for solar application

Back to Top